Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
genuine image
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Enhanced Strength and Durability with Pre Installed Threaded Inserts for Easy Clamp and Fixture Installation on Genmitsu PROVerXL 4030 CNC Router Kit
Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine
Artikelnr.: 32088998

Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine

Artikelnr.: 32088998

ANG 88

ANG 121

Prijsdetails

Exclusief verzend- en douanekosten ( Verzend- en douanekosten worden berekend bij het afrekenen )

*Alle artikelen worden geïmporteerd vanuit VS

27%

Op voorraad
VS Geïmporteerd uit USA

QTY:

Nog slechts 5 artikelen op voorraad.
Bestel nu en ontvang het rond Vrijdag, Augustus 21
Beveiligde transactieBeveiligde transactie

Ubuy zet zich in om uw veiligheid en privacy te beschermen. Ons geavanceerde beveiligingssysteem voor betalingen zorgt voor vertrouwelijkheid door uw gegevens tijdens verzending te versleutelen met AES (Advanced Encryption Standards) en SSL (Secure Socket Layer) protocollen. Uw betalingsgegevens zijn 100% veilig, aangezien wij uw betalingsgegevens niet delen met externe verkopers.

Onze beste bezorgdiensten
  • fedex
  • dhl
Enhanced Strength and Durability with Pre Installed Threaded Inserts for Easy Clamp and Fixture Installation on Genmitsu PROVerXL 4030 CNC Router Kit
U-Care-garantie:
Geen
Selecteer een abonnement
fast shipping

Spoedbestelling

free return

Gratis
retourneren*

Stevig verpakt

Stevig verpakt

100% Origineel product

100% Origineel product

pci-dss

PCI DSS Compliance

iso certified

ISO 27001 Certified

paypal payment
visa payment
mastercard payment

Wat opvalt

Durable Material
Made from high-quality, heavy-duty materials, these threaded inserts ensure long-lasting performance and withstand repeated use, providing exceptional support for all your woodworking projects.
Easy Installation
Designed for quick and straightforward installation, allowing users to effortlessly integrate them into MDF spoilboards without the need for specialized tools, saving time and enhancing productivity.
Enhanced Versatility
These inserts promote greater flexibility in tooling and clamping options, making them ideal for various woodworking applications, thus catering to both hobbyists and professionals alike.

Productdetails

Shop Genmitsu Threaded Inserts MDF Spoilboard for PROVerXL 4030 and PROVerXL 4030S CNC Router Machine online at a best price in curacao. B08QN1314D
  • Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 512 x 400 x 15mm ( 20.2” x 15.7” x 0.6”)
  • The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.
  • Perfectly compatible with Genmitsu PROVerXL 4030 CNC router kit.
  • Pre installed threaded inserts for your clamps and fixtures. Easy to install the spoilboard with pre drilled holes.
  • We recommend keeping a spare spoilboard so you’re not stuck if the one you’re using gets damaged.
Maximum Rotational Speed1 rpm
Battery DescriptionCorded Electric
Item Dimensions W x H20.16"W x 0.59"H (51.2 cm)
Item Weight1.93 kg
Material TypeMDF
Brand NameGenmitsu
Model NumberMDF4030
Number of Packs1
Unit Count1 Count
UPC816550024195
Included ComponentsPROVerXL 4030 Threaded Inserts MDF Spoilboard
Item Type NamePROVerXL 4030 Threaded Inserts MDF Spoilboard
ManufacturerGenmitsu
Manufacturer Part Number101-63-MDF4030
BrandGenmitsu
MaterialMDF
Product Dimensions (L x W x H)20.16"W x 0.59"H (51.2 cm)

Voor wie is dit geschikt?

Suitable For
  • Professional Woodworkers

    Ideal for professionals who require strong, durable hold-downs for precision machining and woodworking projects.

  • Hobbyist Crafters

    Great for hobbyists looking to improve their work area stability and secure materials during diverse crafting tasks.

  • CNC Operators

    Perfect for CNC machine operators needing reliable anchoring solutions to ensure accurate processing without material movement.

Not Suitable For
  • Occasional Users

    Not ideal for users who only infrequently require heavy-duty anchoring, as its features may be excessive for light tasks.

PRODUCTBESCHRIJVING

Heeft u een vraag? Chat met ons

Vragen en antwoorden van klanten

  • vraag: What are PROVerXL 4030 Threaded Inserts used for?

    antwoord: PROVerXL 4030 Threaded Inserts are designed for use in MDF spoilboards, providing a secure anchoring point for various tool accessories. These inserts allow you to easily attach and detach fixtures, jigs, or clamps without damaging the spoilboard itself. This is particularly beneficial in CNC routing applications where precision is key. By incorporating these inserts, users can set up their workpieces more efficiently, making repetitive tasks smoother and more accurate.
  • vraag: How do I install the PROVerXL 4030 Threaded Inserts?

    antwoord: Installing the PROVerXL 4030 Threaded Inserts involves using a specific drill bit to create a precise hole in your MDF spoilboard. Once the hole is made, the insert can be threaded into place with a compatible installation tool. This ensures a secure fit that won’t pull out under stress. Proper installation guarantees that your components are held firmly in place, which is crucial when performing detailed CNC machining tasks.
  • vraag: Are the threaded inserts compatible with all types of spoiboard materials?

    antwoord: While the PROVerXL 4030 Threaded Inserts are specifically designed for MDF spoilboards, they can also be used in other softwood or composite materials. However, their performance may vary depending on the density and toughness of the board. For optimal results, ensure that the chosen material can adequately hold the inserts for your specific application. Using these inserts enhances the versatility of your setups, allowing greater flexibility while working on various materials.
  • vraag: What size screws are compatible with the PROVerXL 4030 Threaded Inserts?

    antwoord: The PROVerXL 4030 Threaded Inserts accommodate standard screws, typically measuring 1/4 inch. This size is ideal for a wide range of attachments and accessories, ensuring a strong hold. Understanding screw compatibility helps in selecting the right tools for your CNC setup. By using the correct screws, users can maximize the structural integrity of their assemblies, allowing for efficient machining without interruptions due to loose fixtures.
  • vraag: Can I use these inserts for lifting applications?

    antwoord: PROVerXL 4030 Threaded Inserts are not typically designed for lifting applications; they are primarily intended for anchoring tools and fixtures. Their strength is geared toward holding components in place during machining rather than bearing heavy loads. For lifting purposes, specialized lifting mounts or hardware should be used. However, in scenarios where lightweight configurations are needed, these inserts can offer support for lighter components.
  • vraag: What maintenance do PROVerXL 4030 Threaded Inserts require?

    antwoord: The PROVerXL 4030 Threaded Inserts require minimal maintenance, primarily focusing on cleaning any debris or chips from the threaded areas to ensure smooth screw insertion. Regularly checking for wear is beneficial, particularly in high-use applications. This attention to detail helps maintain the performance and longevity of both the inserts and spoilboard. Keeping them clean directly translates to improved operational efficiency and accuracy during machining.
  • vraag: Do PROVerXL 4030 Threaded Inserts offer adjustable depth?

    antwoord: PROVerXL 4030 Threaded Inserts are designed to provide a fixed depth once installed, allowing for consistent anchoring of components. The design might include a flush fit in the spoilboard, ensuring that the surface remains flat. This feature is essential for applications where precision and even surfaces are critical. Knowing this helps users create a setup that maintains the accuracy needed in their machining processes.
  • vraag: What Machining methods can I use with these inserts?

    antwoord: You can utilize the PROVerXL 4030 Threaded Inserts with various machining methods, including CNC routing, drilling, and milling. These inserts are particularly advantageous for CNC routing, as they provide a stable mounting point for fixtures. This stability aids in maintaining consistent feed rates and achieving high-quality results. Incorporating them into your machining methods will enhance productivity and precision in your projects.
  • vraag: How do I determine the spacing for multiple inserts?

    antwoord: When determining spacing for multiple PROVerXL 4030 Threaded Inserts, it's essential to consider the size and shape of your workpiece, as well as the required support. A general rule is to space them apart according to the load distribution needs of the attached fixtures. Using a consistent grid pattern can also help maximize the effectiveness of the inserts. This approach facilitates easier repositioning and improves adaptability in various machining scenarios.
  • vraag: Where can I buy PROVerXL 4030 Threaded Inserts MDF Spoilboard in curacao?

    antwoord: You can buy the PROVerXL 4030 Threaded Inserts MDF Spoilboard from Ubuy. They offer a convenient platform where you can find this product along with other related accessories for your CNC projects. With competitive options and a user-friendly approach, Ubuy makes it easier for you to enhance your machining capabilities with the right tools. Visit Ubuy to explore their offerings and find what you need for your woodworking tasks.

Genmitsu Tables MDF4030 Editorial Review

Geen beoordelingen van de redactie gevonden

Klantbeoordelingen en -waardering

9 klantenbeoordelingen
  • 5 ster
    49%
  • 4 ster
    16%
  • 3 ster
    15%
  • 2 ster
    20%
  • 1 ster
    0%

Beoordeel dit product

Deel uw mening met andere klanten

Voordelen

  • Strong and durable inserts
  • Easy installation process
  • Good for MDF spoilboard
  • Minimizes tear-out
  • Versatile for multiple projects

Nadelen

  • May require some adjustments.

VERTROUWEN IN HET PLATFORM & KOPERSZEKERHEID

trustpilot logo
4.2/5 9250 + reviews
Recensies lezen
MA
Mohammad
Geverifieerde koper

“Excellent quality and original too,when ubuy send original things I will appreciate that ,I very satisfied thank you”

23 July 2026 · via Trustpilot
CK
Chitra
Geverifieerde koper

“The order and delivery progress was communicated very well. Package arrived within the estimated time. Products arrived as expected in good condition.”

22-Jul-26 · via Trustpilot
K
kund
Geverifieerde koper

“Good supply of products. Safe payment methods, and shipment worldwide! Genuine products.”

23-Jul-26 · via Trustpilot
OO
Onesi
Geverifieerde koper

“Was my first time buying a product from Ubuy, but I found it so helpful. This is reliable. Gonna place a new order!”

22 July 2026 · via Trustpilot
SJ
SAO JOHN
Geverifieerde koper

“Ubuy is a great online platform to buy stuff. Reliable, fast delivery time and great value for money. I've been using Ubuy online shopping platform for three years now and will continue to do so.”

23 July 2026 · via Trustpilot
Veilig Afrekenen Wereldwijde levering Eenvoudig retourneren Originele producten

Prijsgeschiedenis van het product

Belangrijke informatie

  • Beperkingen: voor producten die internationaal worden verzonden, gelieve er rekening mee te houden dat eventuele fabrieksgaranties mogelijk niet geldig zijn; ondersteuningsopties van de fabrikant zijn mogelijk niet beschikbaar; producthandleidingen, instructies en veiligheidswaarschuwingen zijn mogelijk niet in de taal van het land van bestemming; de producten (en bijbehorende materialen) zijn mogelijk niet ontworpen in overeenstemming met de normen, specificaties en etiketteringsvereisten van het land van bestemming; en de producten zijn mogelijk niet in overeenstemming met de voltage- en andere elektriciteitsstandaarden van het land van bestemming (waardoor het gebruik van een adapter of omvormer nodig is, indien van toepassing). De ontvanger is ervoor verantwoordelijk zich ervan te verzekeren dat het product rechtmatig kan worden geïmporteerd naar het land van bestemming. Bij het bestellen bij Ubuy of diens partners geldt de ontvanger als de geregistreerde invoerder en dient zich als zodanig te houden aan alle wetten en voorschriften van het land van bestemming.
  • Omdat Ubuy een wereldwijde zoekmachine is, zijn niet alle producten die op Ubuy worden vermeld ook te koop. Producten zijn onderworpen aan wetgeving inzake export en handel.

ANG 88

ANG 121

Bestel nu en ontvang het rond Vrijdag, Augustus 21

QTY:

Nog slechts 5 artikelen op voorraad.
Beveiligde transactieBeveiligde transactie

PCI DSS-compliant en ISO 27001:2022-gecertificeerd, met versleutelde betalingen en volledige kopersbescherming bij elke bestelling.

Onze beste bezorgdiensten
  • fedex
  • dhl
Snelste grensoverschrijdende levering

Kenmerken en voordelen

  • MDF material with enhanced strength and durability
  • Compatible with Genmitsu PROVerXL 4030 CNC router kit
  • Flat and smooth surface ensures stability of cutting material
  • Easy to install with pre-drilled holes and pre-installed threaded inserts
  • Spare spoilboard recommended for backup
  • Size is 512 x 400 x 15mm

Ubuy-garantie

Ervaar zorgeloos winkelen met 100% originele producten, PCI DSS-conforme betalingsbeveiliging, ISO 27001-gecertificeerde gegevensbescherming, de snelste grensoverschrijdende levering, gratis retourneren *, en veilige verpakking bij elke bestelling.