Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
genuine image
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; Non-HF--Non-HF Blowback Start, there is no HF interference; CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output; SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allow you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector saves your time to connect the torch to your plasma cutter; INPUT: Automatic Dual Voltage 110~125V or 215~245V; OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V; SUITABLE CUTTING--Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)
Artikelnr.: 92581152

Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch

86% van de respondenten zou dit aanraden aan een vriend

Artikelnr.: 92581152

ANG 1899

Prijsdetails

Exclusief verzend- en douanekosten ( Verzend- en douanekosten worden berekend bij het afrekenen )

*Alle artikelen worden geïmporteerd vanuit VK

Op voorraad
VK Geïmporteerd uit UK
Bestel nu en ontvang het rond Zaterdag, September 05
Beveiligde transactieBeveiligde transactie

Ubuy zet zich in om uw veiligheid en privacy te beschermen. Ons geavanceerde beveiligingssysteem voor betalingen zorgt voor vertrouwelijkheid door uw gegevens tijdens verzending te versleutelen met AES (Advanced Encryption Standards) en SSL (Secure Socket Layer) protocollen. Uw betalingsgegevens zijn 100% veilig, aangezien wij uw betalingsgegevens niet delen met externe verkopers.

Onze beste bezorgdiensten
  • fedex
  • dhl
PORTABLE and POWERFUL--The LTP5500D can easily cut 3/5” (15 mm) metal with ultimate portability weighing only 15lbs; Non-HF--Non-HF Blowback Start, there is no HF interference; CNC ENABLED Pre-installed CNC Interface with THC (Torch Height Controller) signal output; SETUP WITHIN 1 MIN--the per-installed NPT 1/4” industry type D plug and air filter regulator allow you to quick connect to your air compressor by using the stand coupler existing on your air compressor. The Non-HF start 14ft torch with central connector saves your time to connect the torch to your plasma cutter; INPUT: Automatic Dual Voltage 110~125V or 215~245V; OUTPUT: 20-55 A DC output, 3/5” ideal clean cut and 1” maximum severance cut under 220/240V. 20-35A DC output, 3/8" ideal clean cut and 1/2" maximum severance cut under 110/120V; SUITABLE CUTTING--Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.
fast shipping

Spoedbestelling

free return

Gratis
retourneren*

Stevig verpakt

Stevig verpakt

100% Origineel product

100% Origineel product

pci-dss

PCI DSS Compliance

iso certified

ISO 27001 Certified

paypal payment
visa payment
mastercard payment
Note: Step Up Voltage Transformer required for using electronics products of VK store (230 V). Recommended power converters Nu kopen.

Wat opvalt

Advanced CNC Functionality
Equipped with CNC capabilities, this plasma cutter allows for precision cutting and automation, solving complex tasks effortlessly while enhancing productivity for professional welders and fabricators.
Dual Voltage Operation
Versatile dual voltage of 110V/220V ensures compatibility with diverse power sources, offering flexibility and convenience for various workshop settings while maintaining efficient performance.
Height Control Technology
Innovative THC technology automatically adjusts torch height, ensuring optimal cut quality and preventing damage, which significantly improves user experience and operational efficiency in cutting projects.

Productdetails

Shop Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC) online at a best price in curacao. B07Y3Y12VF

Voor wie is dit geschikt?

Suitable For
  • CNC Enthusiasts

    Ideal for users who want precision cutting with CNC capabilities and enhanced control over the cutting process.

  • Metal Fabricators

    Perfect for professionals in metal fabrication requiring clean cuts in various metals with flexibility in voltage.

  • Hobbyist Welders

    Great for hobbyists needing a reliable plasma cutter for personal projects, providing high-quality cuts without extensive training.

Not Suitable For
  • Beginners

    Not suitable for inexperienced users due to its advanced features and the necessary skill to utilize effectively.

PRODUCTBESCHRIJVING

Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter THC Torch Height Control Enabled, Dual Voltage 110V/220V, 3/5 inch Clean Cut, Brown (55AMP CNC)

Heeft u een vraag? Chat met ons

Vragen en antwoorden van klanten

  • vraag: What is the weight of Lotos Supreme LTP5500DCNC?

    antwoord: The Lotos Supreme LTP5500DCNC is extremely portable and weighs only 15lbs.
  • vraag: What types of materials can be cut by this plasma cutter?

    antwoord: The Lotos Supreme LTP5500DCNC can cut Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, and other metals.
  • vraag: What is the output and input voltage of this plasma cutter?

    antwoord: The input voltage is automatic dual voltage 110-125V or 215-245V and the output voltage ranges from 20-55A DC output, with 3/5” ideal clean cut and 1” maximum severance cut under 220/240V.

LOTOS Editorial Review

The Lotos Supreme LTP5500DCNC Non-Touch Pilot Arc CNC Enabled Digital Plasma Cutter has garnered a mixed reception from users, with a notable majority praising its performance while a small number have experienced issues. Many reviewers highlight its incredible value, especially for a CNC-capable, dual-voltage unit, often comparing it favorably to much more expensive brands such as Hypertherm. Users have reported excellent cutting capabilities, with some noting that it even surpasses their previous machines in terms of performance when cutting metal up to 1/4 inch thick. One of the standout features mentioned is the ability to operate effectively at both 110V and 220V, making it versatile for different working environments. Customers also appreciate the minimal cleanup after cutting, suggesting that the precision and efficiency of the cutter contributes to an overall pleasant user experience. However, not all feedback has been positive. A few users reported technical issues such as inConsistent arc performance and insufficient cutting power when attempting to work with thicker materials. The frustration was compounded by some experiences with customer service, where users found support lacking—particularly regarding technical assistance and the initial setup guidance. On the whole, customer experiences with the Lotos LTP5500DCNC are predominantly favorable, especially for individuals seeking a reliable plasma cutter without breaking the bank. As with any product, potential buyers should weigh the Pros and Cons and Consider their specific needs for metal cutting. **

Klantbeoordelingen en -waardering

1 klantenbeoordelingen
  • 5 ster
    0%
  • 4 ster
    100%
  • 3 ster
    0%
  • 2 ster
    0%
  • 1 ster
    0%

Beoordeel dit product

Deel uw mening met andere klanten

Voordelen

  • Excellent value for a CNC-capable plasma cutter
  • Dual voltage (110V/220V) for versatile use
  • Impressive cutting performance, especially on materials up to 1/4 inch thick
  • Minimal cleanup required after cutting
  • Positive support experiences for some users

Nadelen

  • InConsistent arc performance reported by a few users

VERTROUWEN IN HET PLATFORM & KOPERSZEKERHEID

trustpilot logo
4.2/5 9250 + reviews
Recensies lezen
MA
Mohammad
Geverifieerde koper

“Excellent quality and original too,when ubuy send original things I will appreciate that ,I very satisfied thank you”

23 July 2026 · via Trustpilot
CK
Chitra
Geverifieerde koper

“The order and delivery progress was communicated very well. Package arrived within the estimated time. Products arrived as expected in good condition.”

22-Jul-26 · via Trustpilot
K
kund
Geverifieerde koper

“Good supply of products. Safe payment methods, and shipment worldwide! Genuine products.”

23-Jul-26 · via Trustpilot
OO
Onesi
Geverifieerde koper

“Was my first time buying a product from Ubuy, but I found it so helpful. This is reliable. Gonna place a new order!”

22 July 2026 · via Trustpilot
SJ
SAO JOHN
Geverifieerde koper

“Ubuy is a great online platform to buy stuff. Reliable, fast delivery time and great value for money. I've been using Ubuy online shopping platform for three years now and will continue to do so.”

23 July 2026 · via Trustpilot
Veilig Afrekenen Wereldwijde levering Eenvoudig retourneren Originele producten

Prijsgeschiedenis van het product

Belangrijke informatie

  • Beperkingen: voor producten die internationaal worden verzonden, gelieve er rekening mee te houden dat eventuele fabrieksgaranties mogelijk niet geldig zijn; ondersteuningsopties van de fabrikant zijn mogelijk niet beschikbaar; producthandleidingen, instructies en veiligheidswaarschuwingen zijn mogelijk niet in de taal van het land van bestemming; de producten (en bijbehorende materialen) zijn mogelijk niet ontworpen in overeenstemming met de normen, specificaties en etiketteringsvereisten van het land van bestemming; en de producten zijn mogelijk niet in overeenstemming met de voltage- en andere elektriciteitsstandaarden van het land van bestemming (waardoor het gebruik van een adapter of omvormer nodig is, indien van toepassing). De ontvanger is ervoor verantwoordelijk zich ervan te verzekeren dat het product rechtmatig kan worden geïmporteerd naar het land van bestemming. Bij het bestellen bij Ubuy of diens partners geldt de ontvanger als de geregistreerde invoerder en dient zich als zodanig te houden aan alle wetten en voorschriften van het land van bestemming.
  • Omdat Ubuy een wereldwijde zoekmachine is, zijn niet alle producten die op Ubuy worden vermeld ook te koop. Producten zijn onderworpen aan wetgeving inzake export en handel.

ANG 1899

Bestel nu en ontvang het rond Zaterdag, September 05

QTY:

Beveiligde transactieBeveiligde transactie

PCI DSS-compliant en ISO 27001:2022-gecertificeerd, met versleutelde betalingen en volledige kopersbescherming bij elke bestelling.

Onze beste bezorgdiensten
  • fedex
  • dhl
Snelste grensoverschrijdende levering

Kenmerken en voordelen

  • Portable & Powerful
  • Non-HF Start
  • CNC Enabled
  • Quick & Easy Setup
  • Dual Voltage Input
  • Suitable Cutting

Ubuy-garantie

Ervaar zorgeloos winkelen met 100% originele producten, PCI DSS-conforme betalingsbeveiliging, ISO 27001-gecertificeerde gegevensbescherming, de snelste grensoverschrijdende levering, gratis retourneren *, en veilige verpakking bij elke bestelling.